Free matching service by Voraus LLC: We connect property owners and businesses in Toledo, OH (Toledo, Maumee, Perrysburg, Rossford and Walbridge, Holland, Sylvania, Oregon and Northwood, Bowling Green, Waterville and Whitehouse, Swanton and Delta) with independent local machinery movers and riggers. We are not a machinery mover and do not perform the work. Request a match below or call (419) 725-7541.
Typical Machine Tool Rigging Equipment & Capacities
| Machine Type | Typical Weight Range | Primary Rigging Gear Used |
|---|---|---|
| Vertical / Horizontal CNC Machining Center, Lathe, EDM | 8,000 – 35,000 lbs | Cushion-tire industrial rigger forklift (15k–40k lb), air/polyurethane machinery skates & toe jacks |
| Injection Molding Machine, Die-Cast Cell, Laser Cutter | 30,000 – 90,000 lbs | 40k–80k lb Twin-Boom / Versa-Lift forklift, spreader bars & precision optical/laser leveling |
| Mechanical / Hydraulic Stamping Press & Crown Assembly | 60,000 – 400,000+ lbs | 200–500 Ton Hydraulic Gantry system, power slide tracks, press pit cribbing & heavy lowboy haul |
Safe unloading, tight-doorway skating and press-pit placement
Auto-supply, glass, tooling and plastics plants across Toledo, Perrysburg, Maumee, Bowling Green, Findlay and Monroe County, MI rely on specialized machinery movers when a new CNC mill arrives on a tarp-covered flatbed or an existing stamping press needs to move three bays over. Unlike general freight carriers, industrial riggers arrive with high-capacity Versa-Lift and twin-boom forklifts, hydraulic toe jacks, low-profile skates and spreader beams designed for fragile machine tool castings.
Before the move, the rigger checks floor slab ratings, trench drain crossings, overhead bus-duct and sprinkler heights, and dock or ground-level door clearances so your machine moves without frame twist or floor damage.
Details to share for a CNC or machine tool move
- Machine make, model, exact dry weight, and overall L × W × H footprint.
- Whether the machine is arriving on a flatbed/conestoga, moving inside the plant, or shipping out.
- Smallest doorway width/height along the path and whether it sets on flat concrete or over a pit.
- Who is handling electrical disconnect, coolant/oil draining, and spindle transit locks.
Common questions: cnc & machine tool rigging in Toledo, OH
How much does it cost to rig and set a single CNC machine in Toledo?
Local unloading and in-plant placement of a standard 10,000- to 25,000-pound CNC mill or lathe with a rigger forklift and skates typically ranges from $1,800 to $4,800, depending on distance from the door, floor obstacles, and whether specialized transportation or gantry setup is required.
Who installs the transit locks on a CNC machine before moving?
Either your maintenance technician or the machine OEM technician should install spindle, turret and axis transit brackets and drain way lube/coolant prior to the rigging crew lifting the machine.
Related Toledo machinery moving guides & pages
Ready to get your machinery moving project moving?
Start with what you know. Something like "Haas VF-4 vertical mill, about 8,000 lbs, moving from Maumee to Perrysburg, plant shut down the week of July 4" gives a rigger enough to plan a site visit.